Instruction manual
14
4. Line up the
adapter brackets
with the mounting holes on the back of the TV.
5. Place the
rectangular washers
over the
adapter brackets
.
6. Insert the
M6x30 mm screws
,
M8x30 mm screws
,
M8x50 mm screws
through the
rectangular
washers
,
adapter brackets
,
spacers
, and into the back of the TV.
7. Use a Phillips screwdriver to tighten the screws. (
figure 8
)
Warning!
Do not over-tighten the screws. If you encounter resistance while you’re
tightening the screws, stop tightening. Failure to do so could result in damage to
the TV.
figure 8
M6x30 mm screw
M8x30 mm screw
M8x50 mm screw
Adapter bracket
Spacers
Rectangular washer
Содержание FPWTLTBAT
Страница 13: ...Instruction manual 9 figure 4...
