StarTech.com FPWTLTBAT, Руководство пользователя

Страница: 11 / 23

Instruction manual
7
Installation
Attach the decorative covers
1. Place a decorative cover over one end of the wall mount .
2. On the back of the
wall mount
, insert a
decorative cover screw
through the top
hole in the
wall mount
and into the
decorative cover
.
Tip! There are arrows on the front of the wall mount to indicate which side is the front.
3. Insert another decorative cover screw through the bottom hole in the wall mount
and into the decorative cover . ( figure 1 )
4. Use a Phillips screwdriver to tighten the screws.
5. Repeat steps 1 to 4 to attach a
decorative cover to the other end of the wall mount .
figure 1
Front of wall mount with decorative covers attached
Decorative cover
Decorative cover screw
Back of wall mount