Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Monitoring Your Fast Ethernet Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1
Monitoring Your Fast Ethernet Converter
The LEDs on the front of the converter are your best indication of the converter’s activity.
Troubleshooting
If you experience any difficulties with your converter, first make sure that all cables are
firmly seated at both ends and that they are plugged into the proper ports.
Link/Activity LEDs are not lit.
• Check that the network device connected to the converter is turned on.
• Make sure that the UTP cables comply with EIA/TIA 568 Category 5 specifications
and that the fiber optic cables comply with industry standards.
Can not transmit data.
• Make sure that the UTP distance does not exceed 100m. If the FDX LED is not lit,
make sure that fiber optic cable distance does not exceed 140m. If the FDX LED is lit,
make sure that the fiber optic cable distance does not exceed 2KM. Also make sure
that 62.5/125 micron multi-mode fiber optic cable is used.
Technical Specifications
4
LED
Color
Status
Description
Power
Green
Lit
Power is supplied
Off
No power
FDX
Green
Lit
Full-duplex mode
Off
Half-duplex mode
Fiber
Green
Lit
Valid link established
Link/Activity
Flash
Data packets received
Off
No link established
UTP
Green
Lit
Valid link established
Link/Activity
Flash
Data packets received
Off
No link established
Standards
IEEE 802.3u 100BaseTX and 100BaseFX
Dimensions
4.84 x 2.67 x 0.98 in. (123 x 68 x 24mm)
Operating Temperature
32-131ºF (0-55ºC)
Operating Humidity
10-95% (Non-condensing)
Emission
FCC Class A, CE Mark
