IIn
ns
stta
alllla
attiio
on
n
Hard Drive installation
To ensure a quick and easy device installation, please read through this section carefully
before attempting to install the device.
WARNING!
Hard drives, like all computer equipment, can be severely damaged by static
electricity.
1. To remove the drive tray(s) from the enclosure: Turn the locking dial to the
OPEN
position (counter-clockwise). Following this, press on the button to open the locking
arm:
2. Once the locking arm is open, pull the hard drive tray out of the enclosure.
3. Place the hard drive you wish to install in the tray (label side up), aligning the
mounting holes located on the bottom of the drive with the mounting holes located on
the bottom of the tray.
4. Fasten the drive to the tray using the provided screws.
5. Insert the drive tray (containing the hard drive) into the slot made available in step 2.
Close the locking arm, until you hear a click.
6.
Optional
: To secure the drive tray in the enclosure, turn the locking dial to the
LOCK
position (clockwise).
7. To add a second drive, follow steps 1-6, using the remaining (empty) drive tray.
Connecting the drive enclosure to a computer
ESATCASE2
Note:
Please do not connect SATCASE2U2R to the host computer, until initial RAID
configuration is complete. For further instructions, please refer to
SATCASE2U2R -
Setting up the RAID function
.
To connect the drive enclosure to a host computer, connect one end of an eSATA cable,
to the eSATA port located on the rear panel of the drive enclosure. Connect the
remaining end of the eSATA cable to an available eSATA port on your host computer.
Instruction Manual
4
LOCK
OPEN
Press here
to open
drive bay
