Instruction Manual
4
T
Trro
ou
ub
blle
es
sh
ho
oo
ottiin
ng
g
Following installation of the necessary software, and restarting the computer, your eSATA
devices should be accessible by the host computer (once connected to CBESATA2 using
an eSATA cable). If you find that the attached devices are not detected by the host
computer, verify that installation was successful by:
Windows® 2000 / XP verification / Vista
1 Right-click on
My Computer
and select
Manage
. This will open the
Computer
Management
dialogue window.
2. In the left pane of the
Computer Management
dialogue window, click on
Device
Manager
.
3. Click on the
+
sign next to
SCSI and RAID controllers
. If
Initio inic1622 S-ATA
Adapter
is listed underneath, CBESATA2 has successfully been installed.
Windows® 98SE / NT verification
1. Right-click on the
My Computer
icon , and select
Properties
.
2. Select
Device Manager
from the System Properties window and click on
SCSI
controllers
. If
Initio inic1622 S-ATA Adapter
device is shown below, it means that
the driver has been installed successfully.
