Instruction Manual
2
IIn
ns
stta
alllla
attiio
on
n a
an
nd
d u
us
sa
ag
ge
e
WARNING:
Do not disconnect any cables or power sources while the hard
drive is active. This can result in data loss and possible damage to the hard
drive. To avoid this, please shut down the host computer prior to disconnecting
the attached eSATA device from the host computer.
Windows® 2000 / XP / Vista Driver Installation
1. Insert CBESATA2 into an available CardBus slot.
2. Windows will detect that the SATA PCI Controller has been connected, and
automatically load the
Add New Hardware Wizard.
Select
Install from a list or
specific location (Advanced)
, and click
Next
to continue setup.
3. Select
Specify the location...
and in the dialogue box provided, type
D:\WINXP
and
click
Next
.
4. Click
Next
and
Finish
respectively.
5. Remove the Driver CD diskette, and select
Yes
when prompted to restart the
computer, in order for the setup to take effect. Once the computer has rebooted, it is
safe to connect your eSATA devices to the newly installed ports.
Regardless of the operating system version being used, please insert the
Driver CD into the CD/DVD-ROM drive, prior to connecting the device to
the CardBus slot.
Windows® NT Driver Installation
1. With the host computer in a powered state, select
Settings
from the Start menu, and
open the
Control Panel
.
2. In the
Control Panel
window, double-click on the
SCSI Adapters
icon.
3. Choose the
Drivers
tab from the SCSI Adapters window, then press
Add
to continue.
4. Click
Have Disk
from the
Install Driver
window.
5. Ensure the Driver CD is present in the CD/DVD-ROM drive, and type
D:\WINNT4.0
into the field designating the file’s location. Press
OK
to continue setup.
6. Select
Initio inic1622 S-ATA Adapter
from the window then click
OK
to continue.
