StarTech.com CB555WG, Инструкция по эксплуатации

Страница: 14 / 22

12
Profile Configuration: Advanced
Parameter Description
Power Saving Disable – The card will always be in Active mode.
Enable (Fast) – The card will be in Power Saving
mode when idle, but some components remain
alive. In this mode, power consumption is greater
than Max mode.
Enable (Max) –
The card will go into Power Saving
mode when idle.
Preamble Type Preamble Type defines the length of the CRC block
for communication among the wireless networks.
There are three modes: Long, Short, and Auto. High
network traffic areas should use the shorter
preamble type. If Auto is selected, the card will
automatically switch the preamble type depending
on the wireless network the card is connecting to.
Fragment Threshold The value defines the maximum size of packets.
Any packet larger than this value will be
fragmented. Select a setting in the range of 256 to
2346 bytes. Minor change is recommended.
RTS Threshold This value defines the minimum packet size needed
for an RTS (Request To Send). For packets smaller
than this value, an RTS is not sent and the packet is
transmitted directly to the wireless network. Select a
setting in the range of 0 to 2347 bytes. Minor
change is recommended.
Receive Antenna Define the receive antenna. If Diversity is
selected, the card will automatically switch to the
antenna with the highest signal strength.