StarTech.com BR455GWDC, Инструкция по эксплуатации

Страница: 45 / 76

43
Access control, continued
Filter Clients by IP
When you are satisfied with your Access Control settings, click Apply.
Parameter Description
Client PC Description The description of the Client PC rule.
Client PC IP Address Enter the IP address range that you want to apply the rule to.
If you are applying the rule to only one IP address, enter the
same address in both boxes.
NOTE : You need to give the LAN PC clients a fixed/static IP
address outside the specified pool (see LAN on page 28) for
Access Control to work properly.
Client Service Check off the services you want to block the user from
accessing.
Protocol Select the protocol type.
Port Range You can enter up to 5 port ranges that the clients will be
blocked from accessing.
Apply Changes, Reset When you are satisfied with your IP Filtering settings, click
Apply Changes.
To clear all fields, click Reset.
Parameter Description
Add PC
From the main Access Control page, click Add PC to bring
up the screen below.
Delete Selected, To remove a setting, select it from the IP Filtering Table and
Delete All click Delete Selected. To clear your settings, click Delete All.