Instruction manual
7
figure 5
Note:
The ARMSTSL is flipped over in
the first drawing to illustrate where
the screws are located.
Reposition the keyboard tray
1. Remove the equipment from the keyboard tray.
2. Raise the ARMSTSL to a position that enables you to access the underside of the
keyboard tray.
3. Use the small hex key to remove the two sets of six screws from the underside of the
keyboard tray. (
figure 5
)
4. Move the keyboard tray, line up the holes, and insert the two sets of six screws.
5. Use the small hex key to tighten the screws.
