StarTech.com A-LAPTOP-DESK-MOUNT Скачать руководство пользователя

Страница: 4 / 25

iii

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Warning Statements

• Assemble this product according to the instructions.

• Read the entire manual and ensure the instructions are fully understood

before assembling and/or using this product.

• Do not exceed the weight capacity of this product. Overloading this product

might result in injury or property damage.

• Weight capacity of the laptop mount: 4.5 kg (9.9 lb.)

• Do not allow children to climb on this product, or use this product without

proper supervision.

• This product is intended for indoor use only and should not be used

outdoors.

• Do not over-tighten the screws. If any resistance is encountered, stop

tightening.

• Assembling this product is a two-person task. Do not attempt to assemble

this product and install equipment without assistance.

• Before adding equipment to this product, ensure the product has been

properly assembled, and that the product can support the weight of the

added equipment.

• Make sure all of the equipment has been properly secured before adjusting

this product.

• Pinch hazard! Keep your fingers clear from moving components.

Varningsmeddelanden

• Se till att du monterar produkten i enlighet med instruktionerna.

• Läs hela manualen och se till att du förstår instruktionerna innan du börjar

montera och använda produkten.

• Överskrid inte produktens viktkapacitet. Överbelastning av produkten kan

orsaka skada på person eller egendom.

• Viktkapacitet för bärbar datorfäste: 4,5 kg (9,9 lb.)

• Låt inte barn klättra på produkten eller använda produkten utan uppsikt.

• Produkten är endast avsedd för användning inomhus och ska inte användas

utomhus.

• Dra inte åt skruvarna för hårt när du monterar produkten. Om du måste ta i

när du skruvar åt kan du sluta skruva åt.

• Det krävs Monitorå personer för att montera produkten. Försök inte montera

produkten och installera utrustning utan hjälp.

• Innan du lägger till utrustning på produkten, se till att produkten är korrekt

monterad, installerad och att produkten klarar av vikten på utrustningen som

du lägger till.

Содержание A-LAPTOP-DESK-MOUNT


























Результаты поиска

Содержание A-LAPTOP-DESK-MOUNT

Отзывы:

Похожие инструкции для A-LAPTOP-DESK-MOUNT

Бренды по названию

Популярные бренды

StarTech.com A-LAPTOP-DESK-MOUNT, Руководство пользователя

Результаты поиска

Содержание A-LAPTOP-DESK-MOUNT

Отзывы:

Похожие инструкции для A-LAPTOP-DESK-MOUNT

Бренды по названию

Популярные бренды