Instruction Manual
4
Please note: It is essential that the drive be positioned properly within the drive bay.
Attempting to install a drive with its interface improperly aligned with the drive bay
interface could cause serious damage to both the drive and the drive bay.
2. Position a 2.5” SATA hard drive so that the SATA interface is directed into one of the
drive bays, label side up. Gently press the drive inward until the front panel door
begins to close, then lock the drive in place by closing the door until it clicks shut.
Repeat this procedure to install a second 2.5” SATA drive, into the remaining bay:
