11
8.
Slide a second
Center Section Assembly
between the other
side of the
Base Brackets
.
(Figure 5)
Note:
The
Setting Numbers
on the
Center Section
Assembly
should be facing the outside of the
Rack
.
9.
Slide the
Left Vertical Rail
between the
Base Bracket
and
the
Center Section Assembly.
Note:
The rack height numbers on the
Left Vertical Rail
should be facing
upright.
10.
Insert two
M8 Bolts
through two
M8 Washers
and into the
holes in the
Base Bracket
that align with the
Vertical Rails
and the
Center Section Assembly.
11.
Tighten the
M8 Bolts
using the
13 mm Wrench
.
12.
Repeat steps 9 to 11 to install the
Right Vertical Rail
.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Figure 5
