9
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
4.
Insert eight
M8 Bolts
through eight
M8 Washers
and into
the holes in the
Corner Sections
(x2) and
Center Sections
.
(Figure 3)
5.
Tighten the
M8 Bolts
on the
Centre Section Assembly
using the
13 mm Wrench
.
Assemble the Rack
1.
Place one
Left Vertical Rail
and
Right Vertical Rail
on the
ground so that they are parallel to one another.
Note:
The rack height numbers should be facing outwards
and up.
2.
Insert one
Center Section Assembly
between the bottom
of the
Left Vertical Rail
and the
Right Vertical Rail
. Ensure
the holes in the ends of the
Center Section Assembly
align
with the holes in the bottom of the
Left Vertical Rail
and
the
Right Vertical Rail
.
Note:
The
Setting Numbers
on the
Center Section
Assembly
should be facing the ground.
3.
Lift a
Base Bracket
so that it is vertical and align the two
holes in the side with the two holes in the
Vertical Rail
and
Center Section Assembly.
Figure 3
