20
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Installing the Top Plate
5.
Position the
Desktop
on the floor, with the 6
Screw Holes
facing up.
6.
Flip the
Sit-Stand Assembly
over with the
Top Plate
facing
down.
7.
Align the 4
Center Screw Holes
on the
Top Plate
with the 4
Screw Holes
on the
Desktop
. When aligning the
Desktop
,
make sure that the
Desktop
is straight when viewing the
Sit-Stand Desk
from the front.
Note:
Make sure that the 2
Side
Screw Holes
at the edge of
the
Desktop
align with the 2
Screw Holes
on the
Adjust-
ment Lever
.
8.
Insert the 4
M6 x 15 mm Hex Screws
through the
Screw
Holes
on the
Top Plate
and into the
Screw Holes
on the top
of the
Desktop
.
