Starrett W2900, Руководство пользователя

Страница: 14 / 118

14 PKG08863-UMW2900
WIRELESS OVERVIEW
3. If you press and hold the Wireless button, you will go into the
functions mode and be able to change between the three
functions. The tool will display either “ On” or “Off” and then
the current function. If you continue to hold the Wireless button,
and then press the In/mm button, the tool will cycle through the
functions one at a time. When the desired function is displayed
release the Wireless button to select the function.
3.1 Communicating with your Wireless Tool
Starrett Wireless Tools communicate with a DSA 4.0 Gateway using
encryption. This prevents outsiders from ‘listening in’ to the data being
sent. The first time a wireless tool talks to a Gateway they establish
a set of security keys. Both sides remember the key and use it to
reestablish communications. This can occur when the tool is turned off
or is moved out of radio range. Once the tool is within range and turned
on, the Wireless Tool and the Gateway will use the security keys to
automatically resume communicating.
3.1.1 Establishing First Communications
Make sure your DSA 4.0 system is on and communicating with the
Gateway (1). Turn on the tool, and after a little while the tool will appear
in the DSA 4.0 application on the Gateway Tab, match the UID number
on the tool with the one in DSA 4.0. The Permissions column will be
Red and labeled “Blocked”. Click on the Blocked Button. The Button will
immediately turn Gray and display “Updating”. After a slight delay the
button will turn green and display Allowed. At this time the wireless tool
has a blank security key, and after a slight delay the Connection Status
column will change to Online and show Green. This means that they
have exchanged keys and successfully established a secure link.