Starrett FORM 966, Руководство пользователя

Страница: 6 / 16

6 FORM 966
ENGLISH
GUIDELINES FOR INDICATOR CARE
1. Avoid dropping the indicator.
2. Avoid extreme temperatures and direct sunlight for extended periods.
3. Avoid contact with liquids and dusty environments.
4. Avoid shocks to the contact point and spindle.
5. Do not apply radial force to the spindle.
6. If the indicator is stem-mounted, protect it from being hit or bumped to
avoid stem/case mechanical alignment damage.
7. Do not over-tighten the mounting mechanism. If possible, use clamp
mounting rather than set screws to prevent damage to the spindle.
8. Clean the spindle frequently with a dry cloth or a chamois to prevent
sluggish or sticky movement. Isopropyl alcohol may be used to remove
gummy deposits on metallic parts. Do not apply lubricant to the spindle
or use solvents.
9. Do not disassemble or modify the indicator.
OPERATING INSTRUCTIONS
1. Install batteries (included with indicator).
2. Lightly clean the contact point.
3. Secure the indicator to an appropriate holding device.
4. Press the ON/OFF button to turn the indicator on.
5. Select the unit of measure (inch or millimeter) by pressing the IN/mm
button. (Not applicable to metric indicator models).
6. Place the indicator perpendicular to the reference surface being measured.
Allow enough movement to be able to take a higher or lower measurement.
7. Press the ZERO button to reset the display.
8. Lift the spindle, remove the reference surface and place the work piece
to be measured. Put the spindle carefully on to its surface. The measured
value will be shown on the LCD.
9. Press and hold the ON/OFF button to turn the indicator off. If left
unattended, it will turn off automatically in 30 minutes.