- 12 -
10) Touch Probe Option.
An optional touch probe can be installed in the base of the optical video
probe as illustrated above. This allows the system to make 3D measurements and create 3D
constructs from parts with vertical and slanted surfaces. Touch probe operation is supported by
M3 CNC 3D software.
11) Joystick / Trackball Operator Control Unit.
Used for manual motion control, probe height
control, zoom control, and light intensity control. The output of the control unit is processed by
M3 software which then issues the required control commands. The unit is used for manual
inspection and short runs, also for teaching inspection routines for automated inspection. The
back of the unit includes a duplicate red Emergency Stop (E-Stop) button.
12) Ergonomic Workstation.
Available as an option with AV300 systems. Supports the AV300 metro-
logy unit. Houses M3 controller, M3 control unit, power supplies, and quartz-halogen lamp housings (non-LED
systems). A workstation extension can be attached to right or left side of main unit.
13) Machine Pedestal.
Standard with AV350 and AV450 systems. Supports metrology unit. Houses M3
control unit, power supplies, and quartz-halogen lamp housings (non-LED systems). Pedestal dimensions are
79 x 93 x 119 cm (31.0” x 36.5” x 47.0”). A small shelf, which is attached to the side of pedestal
and supports the joystick and trackball unit, adds 25 cm (10”) to width.
14) Control Cart.
Standard with AV350 and AV450 systems. Supports 24” touch screen monitor and PC,
keyboard and mouse. Height of cart is adjustable by 25 cm (10”) so that the system can be
operated from a standing or sitting position.
Standard LED ring light
Entry port for optional coaxial
illumination
Optional touch probe
Lead screw for 10 cm (4”) of height
adjustment
CNC controlled drive motor
Clamp for attachment to optical probe
Optional add-on LED quad dark-field
ring light with intensity adjustable in
four quadrants.
