1
Light Weight
Carbon Fiber Calipers
No. 5001B Series
User’s Guide
INTRODUCTION
This Starrett product is designed for ease
of use and provides the ability to output
measurements to a variety of peripherals,
either through a traditional wire or by
connecting to a Starrett DataSure
®
Wireless Data Collection System End Node.
Changing Battery
If a “B” is displayed on the left side of the
display, the battery needs to be changed.
Remove cartridge and replace with Lithium
3V CR2032 battery. Changing the battery
will automatically reset the indicator to
factory defaults.
To remove the catridge, slide the battery
carrier (2) in the direction of the arrow
in Fig. 1. Remove the battery from the
carrier and replace it with a fresh CR2032
battery. Then, slide the carrier back into
the housing.
OPERATING INSTRUCTIONS
Button Functions
MODE
and
SET
button operations are:
Press and Release and Press and Hold
ON / OFF
To turn gage
ON
:
Press and Release
ON/OFF
To turn gage
OFF
:
Press and Hold
ON/OFF
(Note: When the tool is turned on it will
remain in whichever mode it was in when
it was turned off.)
Fig. 1
2
1
3