Starrett 2900-1 Series, Руководство пользователя

Страница: 8 / 118

SHIFT/SET
Button
Press The LIMIT icon will start flashing.
SHIFT/SET
Button
Press The LIMIT icon will stop flashing.
SHIFT/SET
Button
Press Then
LIMITS
Button
Press
PRESET
Button
Press
PRESET
Button
When Preset is flashing;
8
ENGLISH
3 - To increment the value of the digit or the plus/minus sign;
4 - To exit the Preset function:
2.1 Setting the Limits (Go/No Go Function)
Note: This function is only available with the 6 button
indicators.
1. Select the units to be displayed with the
IN/mm
button.
2. Press the
SHIFT/SET
button. The SET icon will appear in
the bottom left corner Fig.6A.
3. Press the
LIMITS button. The MIN LIMIT icon (MIN LIM)
will appear in the upper middle of the display Fig.6B.
4. Press the
SHIFT/SET
button. The LIMIT icon will flash
on/off.
5. Adjust the gauge using a reference surface to the desired
minimum value.
6. Press the
SHIFT/SET
button to capture the minimum
value. The LIMIT icon will stop flashing.
1 - To enter Min Limit mode.
2 - To enter the Min value.
Adjust the gauge using a reference surface to the desired minimum value.
3 - To capture the minimum value
7. Press the LIMITS button. The MAX LIMIT icon will appear in the top middle of the
display, see Fig.7.
8. Press the
SHIFT/SET
button. The LIMIT icon will flash on/off.
9. Adjust the gauge using a reference surface (gage block) to the desired maximum
value.
10. Press the
SHIFT/SET
button to capture the maximum value. The LIMI T icon will