Starport Cellphone Detector Plus 610, Руководство пользователя

Страница: 12 / 15

12
5) Detection range is generally longer indoors than outdoors. This is
because mobile phones usually produce stronger signals inside a
building.
6) Characteristics of the cellular signal being detected are an important
factor. Some signals are easier to detect than others and the art is
getting the right balance. For example, GSM will be easier to detect than
CDMA. A phone call being initiated will be easier to detect than an
existing ‘walk-in’ conversation or an SMS message.
Tip: If you are within 1 or 2 km of a cellular base station, for most
applications the THRESH dial should be set to maximum.
CHANGING THE VOICE MESSAGE
Your Cellphone Detector Plus™ has a voice alert message already
installed by the manufacturer supplier. If required you can replace this
message with your own. There are currently 2 methods to do this:
External mic . Connect a mic into the Audio-In socket on the base of
your unit. Then move switches #6 and #7 to the ON position. The green
LED will continually flash to indicate Record mode is active. Start
speaking into the microphone (a message not lasting more than 16
seconds) AND AT THE SAME TIME depress the TEST / MUTE / REC
button on your Cellphone Detector Plus™. Keep it depressed while you
are recording. When you have finished speaking, immediately release
the TEST / MUTE / REC button. Your unit will automatically playback
the new message. Move switches #6 and #7 back to the OFF positions.
PC sound file . Connect one end of a 3.5mm audio output cable from
your PC into the Audio-In socket on the base of your unit. Then move
switch #7 to the ON position. The green LED will continually flash to
indicate Record mode is active. Start to play your sound file (a message
not lasting more than 16 seconds) AND AT THE SAME TIME depress
the TEST / MUTE / REC button on your Cellphone Detector Plus™.
Keep it depressed while the PC file is playing. When the file has ended,
immediately release the TEST / MUTE / REC button. Your unit will
automatically playback the new message. Move switch #7 back to the
OFF position.
Reminder: for normal usage switches #6 and #7 should always be
placed in the OFF (DOWN) position.