STARPLUS Starplus DHS-L, Техническое руководство

Страница: 89 / 294

Programming 3-19
Chapt er 3 - Key Station Features, Opera tion, and Programming
2. Time of Day Tab. Time of day tables defi ne which LCR trunk
routes will be used for a par ticular time of
day. A different LCR trunk route may b e
assigned to a di fferent ti me slot during the
day.
º List Number 01-60 Enter a time of day list number.
º Time Assignment The time assignments are established by
entering a starti ng ti me i n TIME 1 and an
ending time in TIME 2.
TIME 2 then becomes your starting time for
the next time slot of the day.
TIME 6 becomes the start time for the last slot
of the day with TIME 1, time 1 being the
ending time.
º Route Assignment Each time slot has an LCR route table
assigned to it. Enter a route 1-24 for each
time slot for the day.
Route Tab. There are 24 route tables. Each table has 4
dig it modification tabl es -- choice 1 is the
pri mar y; choice 2 is the secondary, etc.
º List Number 1-24 Enter the li st numb er.
º Choice 1-4 Enter the choice.
º Route 1-24 Enter the trunk route to use when this choice
is imp lemented.
Dgt Modi Tab. There are 24 digi t modification tabl es which
are used in conjuncti on with the trunkroutes
to ensure that the proper dial ing sequence i s
performed.
º List Number 1-24 Enter the number of the digit modifi cation
table to be prog rammed.
º Delete Digits None,1-16 0 Enter the location of the digit, if any to delete
from the dialing string. The location can be
from 0 (none) to 16.
º Prefix Digi ts 0-9,*,# Empty Up to 14 digits can be prog rammed as prefix
dig its Prefix digits are dialed pri or to the
number and can be 0-9,*,# pause and wait for
dialtone.
º Insert Digits 0-9,*,# Empty Up to 16 digits may be inserted into the
dialing stri ng. The digits are inser ted in the
string at the i nsert location.
º Insert Position 0-16 0 The inserted digits are inser ted at the i nsert
position. The insert posi tion can be 0 (none)
to 1-16.
Table 3-5: Restriction Programming Table
R E S T R I C T I O N Range Default Description