95
TROUBLESHOOTING GUIDE
z
Self-Guard shuts down its power for no reason.
The Self-Guard automatically turns off the power or goes into the power-savings mode if you
don’t press any button for a certain amount of time (1-9 minutes). This does not indicate
malfunction of the system. In “RECORD” and “TRANSMIT” modes, Self-Guard turns off only
the LCD, battery status LAMP, and recording status LAMP to save the battery. But, in the rest of
the modes except for “RECORD” or “TRANSMIT”, it turns off the power completely. Set the time
to 0 to deactivate “AUTO POWER OFF” function.
Caution: To maximize the life of the battery, do not turn off “AUTO POWER OFF”
function.
z
Battery power fades quickly.
1.
An external monitor can only be used in the “SEARCH” mode. If you don’t need an external
monitor, select “EXT MON SET” from the menu “OTHERS” of the menu “OTHERS”, and
set it off.
2.
When you don’t need to access the LAN, select “LAN” from the menu “REMOTE SET” of
the menu “OPTION”, and set it off.
3.
When you are not using the Bluetooth function, set “POWER” to off from the menu
“BLUETOOTH”. (SG-3000 only)
4.
If there exists some external cameras, which you are not using, then set off all those
cameras from the menu “CAMERA SET” of the menu “OPTION”.
z
If I connect the Self-Guard with the docking station or the adaptor, then the Self-
Guard turns on its power automatically.
Self-Guard has a function named, “automatic recovery function”, and it automatically turns on its
power when it is provided with external power sources. If there is an electricity (a power)
failure, Self-Guard automatically starts to use the power from its battery. But the Self-Guard
turns off its power, when it is not provided with the power from the adaptor for a long time, and
uses up the whole battery. And as soon as the electricity is available to the Self-Guard, it
automatically starts to charge the battery with electricity, and returns back to the modes just
before it turned off its power (“RECORD”, “TRANSMIT”, or to the initial mode). This function is
very useful when you have installed the Self-Guard in the remote places far away from you. In
the case that you have installed the Self-Guard in remote places, and there happens an
electricity failure for some time and the electricity gets available to the Self-Guard again, then
you have to go to where the Self-Guard is placed to turn it on, and to set it to the “RECORD” or
“TRANSMIT” modes. But the Self-Guards have this “automatic recovery function”, and free the
users from the burden.
z
Self-Guard’s image from the camera or recorded images are blurred.
It may happen when there is dust or other particles on the camera lens, so you should carefully
wipe out those dust and other particles at times with the rolled up soft fabrics or tissue.
z
I cannot go into magnification mode.
You can only go into magnification mode in the case that “OPTION” mode
→
“OHERS”
→
“EXT
MON SET”
→
“MON OUT” is set to off.
z
Audio gets interrupted when playback a file.
Содержание Self-Guard SG-100
Страница 24: ...24 GETTING READY Self Guard...
Страница 83: ...83...
Страница 85: ...85...
Страница 89: ...89 II 3 Other functions a SETUP...
