Starnex Self-Guard SG-100, Руководство пользователя

Страница: 40 / 97

40
Guard unit. If you do not turn off “BUTTON CAM” function and remove the button
camera from the unit, then the Self-Guard may go into the Record or Sleep mode.
When this happens, press ESC button to go into main menu. If you turn off “BUTTON
CAM” function, then it will turn off button camera and its microphone, and restore the
settings before the use of “BUTTON CAM” function for camera(s) and built-in
microphone.
“7.CAM TYPE” - The type of external cameras can be set either in “NTSC” or “PAL”.
Select “8.COLOR SET” to change the brightness(“BRIGHTNESS”), hue(“HUE”),
saturation(“SATURATION”), and contrast(“CONTRAST”) of the cameras connected to
the unit.
Press “8.COLOR SET” and press [ENT], then the next screen appears in the menu as
below.
If the built-in camera in the front side of the unit is turned on, then “1.INT CAM1”
appears on the menu screen. If the built-in camera on the back of the unit is turned on,
then “2.INT CAM2” appears on the menu screen. When both of the built-in cameras are
turned on, then “1.INT CAM1” and “2.INT CAM2 both appears on the menu. Also, when
at least one of the external cameras is turned on, then the “3.EXT CAM” appears on
the menu screen. (SG-110, 210, 310 only) For the built-in cameras, you can only
change the brightness (“BRIGHT”) of it, and for the external cameras, you can change
all the values for “BRIGHTNESS”, “HUE”, “SATURATION”, and “CONTRAST”.
Changing a value for each one of those 4 options in the color set will apply to all the
external cameras connected to the unit. Using [
△
] and [
▽
], select one among the