Starmix IS ARH-1250/1225, Руководство по эксплуатации

Страница: 15 / 172

15
2. Before use.
When unpacking, check that the unit is complete and shows
no signs of transport damage.
Read all the information carefully. They contain important
advice about how to use the unit, safety, maintenance and
care. Please keep these operating instructions somewhere
safe and pass on to any subsequent owners. We reserve the
right to make design and equipment changes.
3. Use original accessories.
Paper filter bag FB 25
for 25 L-tank BGIA Class M approved
5 pcs. = 1 set
Paper filter bag
FB 50
for 50 L-tank BGIA Class M approved
5 pcs. = 1 set
Filter cassettes
FK 4300
Cellulose material, BGIA Class M approved
2 pcs. = 1 set
Filter cassettes
FKP 4300
Polyester material, BGIA Class M approved
2 pcs.=1 set
Filter cassettes
FKP 4300 HEPA (H14)
Three-ply filter cassette, BGIA Class H approved
2 pcs. = 1 set
Plastic emptying bag
for ISC-/IS-ARM-1250/1225, ISC-/IS-ARM-1250 E/1225 E,
ISC-/IS-ARH-1250/1225
BGIA class M and H permitted,
5 pcs. = 1 set
ASBESTOS plastic emptying bag
for ISC-/IS-ARH-1250/1225 ASBESTOS
BGIA class H + Asbestos permitted
5 pcs. = 1 set
For more accessories please refer to our accessories
list or contact us.
4. Fields of application.
For wet and drying suctioning.
Dust class M vacuum cleaners are suited to suction-
ing up/off dry non-flammable dust non-flammable liquids,
wood dust and hazardous dust with AGW’s
≥
0.1 mg/m 3 .
Dust class H vacuum cleaner are suited to suctioning
up/off dry non-flammable dust, carcinogenic and pathogenic
particles, non-flammable liquids, wood dust and dusts
hazardous to health with AGW’s < 0.1 mg/m 3 .
●
In case of any inappropriate usage, improper operation
or repair, the producer shall be exempt from liability.
●
Do not use any damaged extension lines.
●
If the connector line of the vacuum device has been dama-
ged, it must be replaced with a special connector line which
is available from the producer or their service.
●
Electric brushes: Do not allow the rotating brushes to
get into contact with the power connection line.
●
The voltage on the type sign must correspond to the grid
voltage.
●
After every use and before any maintenance, switch off
the vacuum device and pull the power plug.
●
Pull on the plug only, not on the line.
●
Never plug or pull the power plug with wet hands.
●
The socket must be secured via a household fuse with
a suitable current rating.
●
Never open the vacuum device outdoors in rain or
storm.
●
Danger!
●
Danger of suffocation
– Keep packaging material such as plastic bags away
from children
●
Never stand or sit upon the vacuum device.
●
Particular caution is advised when ascending stairs. Pay
attention to standing safely.
●
Do not pull the suction hose and connection line over
sharp edges, kink it or shut it.
●
Always lay the suction hose and connection line so that
nobody may trip over them.
●
In case of any leakage of foam or liquid, immediately
switch off the vacuum device.
●
Always keep dry the inside of the lid.
●
Do not start the vacuum device including its accesso-
ries if:
– the vacuum device shows detectable damage (fissu-
res/cracks);
●
– the power connection line is defective or shows fis-
suring or ageing; or
●
– any invisible defect is suspected (after a fall).
●
– Do not allow the rotating brushes to get into contact
with the power connection line.
●
Warning!
●
Use only the brushes supplied with the vacuum device
or defined in the instruction manual. Use of any other
brushes may pose a safety hazard.
●
Clean and disinfect the vacuum device immediately after
use to prevent microbial contamination due to long-term
failure to clean it, especially when using the device in
food-processing.
●
Do not use any steam jets or high-pressure cleaners for
cleaning.
●
Acids, acetone and solvents may corrode parts of the
vacuum device.
●
Do not leave the device without supervision. In case of
longer interruptions of work, pull the power plug.
●
Warning!
●
Have repairs been made only by experts, e. g. the pro-
ducer’s service. Use original spare parts only.
●
Improperly repaired devices pose a hazard for the user.