8
and other residential type
environments;
– Bed and breakfast type
environments.
23. Save these instructions.
DIRECTIONS
1. Use the plug rotation button to adjust the device
to your wall socket. Regardless of how the plug is
rotated, the device should always be operated in the
vertical position.
ADJUSTING THE DIRECTION OF THE PRONGS ON
THE PLUG
- Press and hold down the plug rotation button.
- Carefully use your other hand to turn the prongs
to the desired position, as shown in the figure. The
prongs have two positions: vertical and horizontal.
However, the device should always be set up to
operate in the vertical position (never horizontally).
- Release the plug rotation button to lock the
prongs in place (Fig. 1).
Note: Press the button again to adjust the position
as needed.
2. Plug the Starlyf
®
Fast Heater into a 220-240V
socket (Fig. 2).
3. To turn on the heater, switch the ON/OFF button
(on the side of the device) to the ON position (Fig. 3).
4. Select the desired temperature. On the
digital display, use the “+” button to increase
the temperature and the “-” button to reduce it
(between 15 ºC and 32 ºC) (Fig. 4).
5. Select the desired fan speed. On the digital
display, press the fan speed button to choose either
high speed (HH) or low (LL) (Fig. 5).
6. When you finish using the device, switch the
ON/OFF button to the OFF position and unplug the
Starlyf
®
Fast Heater from the power socket. Store
the device in a cool, dry place until the next time
you need it (Fig. 6).
SETTING THE TIMER
The Starlyf
®
Fast Heater has a built-in timer that
automatically shuts off the device after a pre-set
time period.
1. After plugging in and turning on the Starlyf
®
Fast Heater, press the timer button to activate it, as
shown in the figure (Fig. 7).
2. Press the timer button repeatedly until the display
shows the number of hours you want the Starlyf
®
Fast Heater to stay on before shutting off. You can
choose from 1 to 12 hours.
3. Once the desired number of hours is displayed,
stop pressing the button.
4. To cancel the timer, turn off the Starlyf
®
Fast
Heater.
NOTE: For safety reasons, the Starlyf
®
Fast Heater’s
maximum default timer setting is 12 hours.
SPECIFICATIONS:
Voltage: 220V-240V (50 Hz)
Energy consumption: 400 W
For indoor use only.
Protection rating II
ENVIRONMENTAL INSTRUCTIONS
Do not dispose this product at the end of
its service life through normal domestic
waste. It has to be disposed through a
collection agency that recycles electric
and electronic devices. This is pointed
out by the symbol on the product, in the
instruction manual, and on the packaging. Please
inquire about local collection agencies that may be
operated by your distributor or your municipal
administration. By recycling, making use of the
materials, or other forms of recycling old units you
are making an important contribution
to protecting our environment.
Made in China
M13440_Manual Starlyf Fast Heater_20180301_DR.indd 8
01.03.18 13:27
