paper interior. Make sure you place it where the magnet,that will attach on the outside, will
not be noticeable. You can leave it loose or glue it into position.
Note:
If you leave it loose, you will have more room to extend the wire when replacing
battery.
You will need to remove your interior when replacing battery, so do not glue it in
place.
Basically how everything will sit.
The battery is left loose sitting on top of the board, in between the 2 LEDs.
Interior must be removed for changing battery.
You may need to add small pieces of card board to the paper interior for blocking out the
white light from the engine and intake sections. If the white light bothers you, tape or glue
pieces of card stock( thick paper) to the models paper interior.
4