For other versions of the receiver:
This receiver has no button. Locate the
S
on the board. Use a piece of wire or tweezers and touch
these 2 connections until the light on the back of the board flashes. Now press the button on your
transmitter. You should now be synced, test your kit.
Thank you again for purchasing the
E/FX™
kit from Starling,
Stanley J. Koziol
All photos contained in this document are property of Starling technologies™. This document may not
be copied, sold or transfered without permission.
E/FX
™
is a trademark of Starling Technologies
™
Copyright © 2008-2013 Starling Technologies
™
www.starling-tech.com