background image

User manual

15

Engine blocking

Engine is blocked with iCAN technology in the “Armed” mode. Thanks 

to the iCAN technology the immobilizer itself selects an event for 

safe engine blocking and supports of remote engine starting systems 

(depending on supported functions in the car CAN-bus).
Engine blocking will be active until ignition switch-off. Blocking will 

be activated again at the next driving attempt. If blocking is repeated 

3 times, engine will be blocked until tag’s detection or immobilizer 

switchover to the «Emergency disarm» mode.

Service mode

Service mode temporary deactivates security functions for the 

maintenance period.
Entry in and exit from the mode is performed by holding the tag button 

for 5 seconds. Transition to the service mode will be indicated by yellow 

color of the LED on the tag.

ATTENTION! ALWAYS

 switch over the immobilizer to the 

service mode when handing the car over for maintenance or 

washing.

Do not hand tags over to third parties to prevent unauthorized access 

to security functions.

Switching to Service mode by means of a service button

This method can be used when tag or paired smartphone are not in 

reach.

Содержание i96can

























Отзывы: