Operation Guide
Handling in vehicle for maintenance
There is a special mode dedicated to handling in the vehicle for
maintenance, in which all of its protection functions are off. The
engine is not locked and the lock control is off in this mode,
irrespectively to presence or absence of labels.
Switching to Service Mode
Switching the immobilizer to the service mode can be
done only when the vehicle is within the label coverage
area.
1) Press and hold down the label button. Upon being pressed, the
label will immediately indicate the current operation mode and
the status of communication with the locking module. Then, a 2
second indication of the next protection mode will be shown.
Hold the button over 7 seconds, until the LED turns yellow,
indicating the possibility of changing to the service mode.
2) Release the label button during the 2 second yellow signal.
3) The transition to the service mode will be confirmed with a
yellow flash.
An example of switching to the service mode:
37
Pressing
label
button
Light
signal
Switching to
Service
Mode
2 sec
2 sec
