Operation Guide
Protection mode selection
To change the protection mode, do the following:
1) Press and hold down the label button. Upon being pressed, the
label will immediately indicate the current operation mode and
the status of communication with the locking module. If the
button is held for over 2 seconds, the LED will turn on for 2
seconds. The color of the flash will correspond to the next
protection mode.
2) Release the label button during the 2 second indication period
of the next protection mode.
3) If the mode change has been done successfully, it would be
confirmed by a LED flash, and its color would correspond to
the new operation mode.
An example of switching to the anti-theft mode:
35
Normal
Anti-theft
The label is only identified
once, after turning on the
ignition. From then on, the
presence or absence of the
label does not affect
operation – the engine can’t
be locked.
Convenient for owner
The label presence is
constantly checked. If the
label is absent for a
specified time period, the
engine is locked.
Highest protection
Pressing
label
button
Light
signal
Switching
to new
protection
mode
2 sec
