Part Number: 6280
Page 4
Version 1.0
© 2022 Starkey Products, Inc.
Final Installation:
1.
Double check everything to make sure it was connected properly.
2.
Now hit the unlock button on your key FOB – the lights should illuminate. If the lights do not
power on, visit the trouble shooting section below. Otherwise proceed to the next step.
3.
Using the supplied zip ties, secure the wiring under the rear of the bumper if not already done. Be
sure to securely zip tie any components that may hang or move.
4.
If you did not need the power extension wiring, install the red caps included in the parts bag.
These caps will plug into the ends of the red & black wires that are unused on the T-
Adapter. If you used the 4572 power extension, you can discard the caps.
5.
Enjoy your new Bed Lighting! The lights will activate when you open any door or unlock the
doors with your Key FOB. Lights will dim automatically when you start the truck or lock the
doors. If you would like to keep the lights on longer than the 25 second time out, you can press the
button for the bed lights on the left side of the headlight switch to activate them for 10 minutes.
