SAFETY WARNINGS
Read all safety warnings and instructions. Failure to follow the warnings and
instructions may result in injury and/or property damage. Save all warnings
and instructions for future reference.
The warning and safety instructions in this manual are not meant to cover all possible conditions
and situations that may occur. Common sense, caution and care must be exercised when
operating or cleaning tools and equipment. Always contact your dealer, distributor, service
agent or manufacturer about problems or conditions you do not understand before operating
the product.
SAVE THESE WARNINGS.
1
• DO NOT
operate pallet truck on inclined surfaces. It must be used on level surfaces only. Unanticipated
motion will occur as soon as the pallet truck lifts a load from surface.
• DO NOT
overload the Pallet Truck beyond the load rating (3000lbs per unit).
• DO NOT
start the vehicle’s engine, or drive with Jack in use. Jacks are designed for hand maneuvering
of vehicles only.
• DO NOT
operate the pallet truck in temperatures above 104 °F or under 41 °F.
• DO NOT
attempt to push the pallet truck over obstacles. They are designed to be used on level and
reasonable smooth surfaces only.
•
During operation and lifting, the load must be centered on the pallet jack.
•
Operating altitude should not exceed 1200 meters.
• DO NOT
operate the pallet truck in corrosive environments such as near flammable and/or explosives.
•
This is a tramp type electric pallet truck with autonomous control, lifting and lowering that is controlled
by the handle button. Improper operation of the pallet truck can damage the machine.
•
Lifting or carrying people is strictly prohibitied.
• DO NOT
use the pallet truck for anything other than the purposes set forth by the manufacturer.
• DO NOT
modify or alter the pallet jack.
• DO NOT
use the pallet truck on lifting or loading ramps.
•
Make sure there is adequate lighting when operating the pallet truck.
• DO NOT
operate the machine beyong the rated capacity. Read all labels and nameplates before
operating the machine.
Содержание 58108
