Stark 58108, Инструкция по эксплуатации и правила безопасности

Страница: 14 / 42

OPERATION
3
13
Braking:
When the accelerator is released normally, the truck will stop until the brake is held in the car through
the regenerative braking of the motor. When emergency braking, the operating handle is quickly turned to
zone A or area C (figure 9), and the brake is carried to the death to realize the emergency braking function.
Parking: Release the acceleration button to stop the moving truck and slow down the truck until the brakes
are on. Lower the fork to the lowest position. Turn off the electric lock.
Emergency Reverse Function: The red button at the end of the handle is the emergency reverse button.
When the body is in contact with the emergency reverse button, the truck will stop immediately and drive
backward for a distance. This is a safety switch designed to prevent the vehicle from being crushed when the
operator encounters an obstacle.
Horn and Reversing Horn: In order to drive safely, the truck is equipped with a driving horn. To remind others
when driving, press the horn button in the middle of the handle, and the horn will ring to warn pedestrians.
Battery Capacity Display: This is located on the dashboard of the truck.
Operation: slowly drive the truck to the items to be transported, insert the pallet fork and move forward slowly,
when the goods completely inserted into the goods after parking, control handle upgrade button, the heavy
lifting to a certain height, back slowly, don’t touch the adjacent goods, when the weight zone is put out the
goods, and then walk handling. When moving the goods close to the area of the goods, it will slow down.
When the moving truck is in a straight line with the goods, then the moving truck will slowly move forward to
the loading area to stop. Slowly press the lower lever, and once the load is held, the fork will be lowered to
the hollow position. When the fork is pulled out of the weight, the back position will be confirmed without any
obstacle. Wait for the fork to leave the weight completely before carrying on a round of handling.