These instructions describe the installation of the Starizona MicroTouch stepper motor onto the focuser
of a Sky-Watcher USA telescope. Separate instructions are included with the MicroTouch autofocuser
for the operation of the electronics and software.
Remove the Focus Knobs from the Sky-Watcher Focuser
Both the fine-focus (black) and coarse-focus (silver) knobs need to be removed. They are each held on
by a single set screw. Use the included 2mm hex wrench to loosen the screws, then slide each knob off
the focuser.
Above:
Focuser with the fine-focus knob removed
