Adjusting Camera Position
The third set of screws (labeled above as
ROTATE
) allow the HyperStar and camera to be
rotated into a different orientation for the purpose of framing objects. Loosen the three
screws slightly. The nylon bushings will allow the lens to rotate with the screws still
somewhat snug. Once the camera and lens are in the desired orientation, tighten down
the screws.
Using Filters
1)
Unthread the top half of the filter adapter from the HyperStar lens
2)
Thread the filter into the inside of the top half of the filter adapter
3)
Thread the top half of the adapter back onto the HyperStar and you are ready to image
