STARFRIT 92721, Инструкция по эксплуатации, Страница: 5 / 7

To weigh different loads consecutively without removing loads from
the scale, put the first load on the scale to obtain a weight reading.
Press Z/T button to reset the LCD reading to "0.00" before adding
next load. You can repeat this operation.
By pressing Z/T, you can see the total weight of all loads on the scale.
If you want to weigh more loads, just press Z/T to reset LCD reading
to "0.00" again.
LCD backlight will be activated when you switch
on the scale. Backlight will automatically shut off
after idling for 30 seconds.
Backlight will light up again whenever scale is
re-activated
6
"ZERO" OR "TARE" FUNCTION
Z/T
Z/T
LCD BACKLIGHT
30 SEC
1
2