1
2
3
You can press UNIT button to toggle the
weight measure between gram, ounce, dwt,
ozt and to pre-set piece counting mode.
Press UNIT to select piece counting mode
'PCS' when the scale is vacant. The scale is
programmed with 3 different pre-set
quantities: 25 pcs, 50 pcs and 100 pcs.
Press UNIT for 3 seconds to select the desired
pre-set quantity value (25, 50 or 100). Rapidly
pressing UNIT will cycle through the pre-sets.
Once a pre-set quantity is selected (for example
50), place this same quantity (50 pcs) on the
weighing platform, and wait for LCD to flash '50'.
The scale now recognizes this weight as the
weight of 50 pcs, and also calculates and stores
in memory the average single unit weight value.
Next time weighing a different quantity of this
same object, simply turn on the scale and place X
quantity of the object onto the weighing
platform. LCD will start by showing the weight as
usual. Press 'UNIT' to switch to piece counting
mode 'PCS' and the LCD will display the quantity
placed on the platform .
TO CHANGE THE UNIT OF WEIGHT MEASUREMENT
PIECE COUNTING MODE
5
UNIT
UNIT
UNIT
Remark:
Repeat the above steps when conducting piece count calculations for different objects. For calibration accuracy,
pre-set quantity of 100 pcs is suggested. An object with a unit weight of less than 1 scale division will not be calibrated.
Содержание 92721
Страница 1: ...High precision scale INSTRUCTIONS ...