SOHOTANK ST4-TB User Manual
Step 4. Final confirmation dialogue will appear to delete partition information.
Step 5. After RAID has been deleted, each of the HDD will revert to original connecting status individually.
!
5. E-Mail Notifications.
Step 1. “Account Management” under “Management” on the left of managing window allows configuring for e-mail notification by
sending “Event Logs” which generated during the operation of ST4-TB.
!
!
!!
!
!
!
!
!
1. ST4-TB will goes into sleep mode when Thunderbolt cable is not connected, while fan and LED indication of ST4-TB will not be
functioning until connecting with Thunderbolt cable.
2. When ST4-TB goes into sleep mode that fan and LED indication of ST4-TB will not be functioning, until ST4-TB has been
reactivated.
3. If HDD was used for RAID in other devices, please revert the HDD to JBOD mode using original device/software before install in
ST4-TB.
4. If monitoring software is being active for a period of time without accessing, please proceed with refreshing or restarting the
software for acquiring an updated status.
5. If an older version of Marvell monitoring software has already been installed in the computer, please remove it completely before
installing the monitoring software from product CD to avoid the occurrence of software corruptions.
6
. Visual Status Indicator Definitions
Status
Power LED
HDD LED
Power on / NO HDD
Blue On
N / A
Power on / HDD Idle
Blue On
Blue On
Power on / HDD Access
Blue On
Blue Blinks
Power on / HDD Fail
Blue On
N / A
7
. Frequently Asked Questions
!
11
