SOHORAID ST4-TB3 User Manual
11
8. Frequently Asked Questions
1. If the ST4-TB3 is turned on, but the Thunderbolt cable is not connected, the fan and power status lights
will both be in stopped/hibernation mode. The fan and power status light will not come on until the
Thunderbolt cable is connected to the computer.
2. When the computer enters hibernation mode, the fan and power status lights will both be in stopped/
hibernation mode. The fan and power status light will not come on until the computer is awake.
3. If a hard disk already contains data from another RAID product or RAID mode has already been set,
we recommend reverting back to JBOD mode before the drive is used with the ST4-TB3 again to avoid
problems accessing the hard drive.
4. If the ST4-TB3 is installed on the Windows OS but can not be connected, refer to the following
steps:
B. ST4-TB3: Let its TB A port connect to Host (PC/Workstation/Server), TB B port to a monitor,
and mDP port to the second monitor.
D
RAIDON tech., ST4-TB3
A. Open the Windows Taskbar.
B. right-click the Thunderbolt icon.
C. Select "Approve Attached Devices".
D. Select the port to which the device is connected.
E. Wait for the dialog box "Approve Thunderbolt ™ Devices" to appear.
F. Select "Always Connect"
G. Press "OK"
。
A
C
B
E
G
F
