Remote Devices
30
Simulation Kit Manual
Net-960E Mobile Data Terminal
The Net-960E is a programmable Mobile Data Terminal (MDT) that can be installed in
vehicles. It is designed to withstand the tough vehicle environment including extreme
temperatures, providing the reliability required for critical mobile data applications.
The current firmware version is v5.09.
The Net-960E displays incoming messages and can initiate outgoing messages
between the vehicle and the fleet manager. It uses the English language by default.
You can add text templates in other languages using the Installer application (MDT
Canned Add/Del or Reply Add/Del).
To add a template:
·
Write a template and send it to the MDT using the
CannedAdd
command.
To remove a template:
·
Write the exact template and send it to the MDT with
CannedDel
command.
The same procedures apply to the reply templates list.
The NET-960E is fully integrated with Starcom fleet management software and can be
used to send and receive messages from the Starcom Online Web application.
Figure 18 Net-960E
Assembling the Net-960E
To mount the Net-960E:
1.
Insert the rubber mounting pads on the inside of the bracket and thread the
rubber pins through any of the three parallel holes on each side.
2.
Rotate the mounts so the holes in the center of the mounts align with the parallel
holes in the bracket.
3.
Hold the terminal between the rubber mounts, attach the side screws, and ensure
the terminal is firmly in position. Do not over-tighten.