59
Kylos Compact User Guide
•
Weak Impact/Strong Impact – events which show two types of
impact on the unit. These events are triggered by the accelerometer,
which can be configured in Installer > Kylos Parameters > Hardware.
•
Location Update – event which will update you on the unit location
status.
•
Power On – alert that is sent when the unit turns on.
•
Light On/Light Off – event which alerts upon a change of light
around the unit. The Kylos light sensor readings are indicated by
numerical values (when the unit is located in a well-lighted place the
light sensor value will be higher than in a dark place). Those values
appear on the Map page and in the reports.
•
Temperature High/Temperature Low – alert sent when the unit’s
temperature sensor detects when the temperature gets lower or higher
than the defined low and high temperature values.
•
No Activity – this event can be used to receive alerts when devices
have stopped transmitting. The default value is 336 hours (2 weeks).
Enter the cellular number and email for the notification to be sent to in the
Notify for
section.
Press
Apply
. The new monitoring event is saved.
Once the events are generated by the units, they will appear on the Monitor
page. You will also receive a notification by SMS. The email notifications are
accumulated and sent once every half an hour to avoid spamming.
