Starck Sefam S.Box Duo S, Руководство для пациента

Страница: 13 / 40

S.Box Duo S and S.Box Duo ST Use  13
Using an SD card
An SD card is used to store the most recent compliance data memorized by the machine, or to update
the settings of your device. Follow the instructions given by the Home Care Provider before using this
card.
Inserting the card
When the device is operating, switch it off by holding down the start / standby button . Insert the
SD card in the corresponding slot: the symbol appears on the top of the screen. If it is blinking, it
means that the card is improperly inserted or non-functional. Reinsert it properly. If the problem
persists, contact your Home Care Provider.
Updating the settings
If the Home Care Provider configured the SD card to update the settings of the device, the machine will
start automatically once the card is inserted in the slot and the symbol blinks slowly on the top of
the screen. Leave the SD card in the slot after the update is finished. This operation can be performed
only once.
Backing up the data
If the data is recorded within the device, the data backup starts automatically when you insert the
memory card into the machine, turn on the power and stop treatment. The symbol blinks slowly in
the status bar on the screen and the display changes: an animation appears at the top, showing three
blocks that move towards the right until the data storage is complete. Do not disconnect the power
supply and do not remove the memory card.
While the data is being stored, the device continues to be operational and the information remains
accessible on the display of the unit.
CAUTION:

Do not remove the SD card during the treatment as data is recorded in real time.

If the symbol or is blinking slowly on the top of the screen, it means that a settings update or a data
backup is in progress. Do not remove the SD card.
Removing the card
Once the recording is finished, switch off the apparatus by holding down the start / standby button .
Wait for the symbol to stop blinking on the screen (up to 2 minutes) and remove the card. You can
now send it to your Home Care Provider.