Starbridge Networks
Lynx L-525 4 Port and Wireless Modem
Page 7 of 56
Installing the Lynx L-525
Connect the ADSL Line and Telephone
An RJ-11 cable will be connected to the wall phone jack and the line-end of
the splitter. Connect another RJ-11 phone wire from the modem-end of the
splitter to the port labeled “line” on the Lynx L-525. A third RJ-11 phone
wire will be needed to connect the telephone to the phone-end of the splitter.
NOTE: See connections on the installation diagram
.
Connect the PC to the Lynx L-525
Use the Ethernet cable to connect your computer directly to the Lynx L-525.
Connect one end of the Ethernet cable to one of the ports labeled LAN on the
rear panel of the Lynx L-525 and connect the other end to the Ethernet port of
your computer. Attach any additional PCs to the Lynx L-525 using RJ-45
cables to the port labeled LAN on the rear panel of the Lynx L-525.
Connect the Power Adapter
Complete the process by connecting the AC power adapter to the POWER
connector on the back of the device and plug the adapter into a wall outlet or
power strip. Then turn on and boot up your PC and any LAN devices, such as
hubs or switches, and any computers connected to them.
