Wireless ADSL Router
USER MANUAL
18
Configure the
second IP
address and...
Use this feature to create a public network on your local LAN,
accessible from the Internet. By assigning an address to this
interface and then statically setting your LAN clients to the same
network, the LAN clients are accessible from the public network
(e.g. FTP or HTTP servers).
5. Set SSID for wireless network if user enabled the wireless
6. Make sure that the settings below match the settings provided by your ISP.
7. Click on the
Save/Reboot
button to save your configurations.
c
Bridging (RFC 2684)
Select the bridge operating mode if your ADSL service provider tells you that you
should. To configure bridging, do the following:
1. Select
Bridging (RFC 2684
) as connection type.
