Starblitz ASPIC, Руководство пользователя

Страница: 22 / 76

20
EN
FR
ES
Changing Flash Tube
1. Discharge the Flash Unit
The flash must be discharged before removing flash tube. To discharge the flash:
1-1.
Make sure the Flash unit is ON
1-2.
Push «TEST» button on the rear panel of the Flash.
1-3. Immediately turn off the power switch. Do not allow more than 1/2 second
between pressing the «TEST» button and turning the flash off.
1-4. Remove battery. It is recommended to wait at least 30 minutes before touching
/removing the flash tube.
Use white cotton gloves or a clean cloth to prevent fingers from touching the
flash tube.
2. Remove Old Flash Tube
First, remove the reflector. You will need to remove the retention spring wrapped
around the top of the flash tube. With needle-nose pliers, unhook the retention
spring loop. Grip the base of the flash tube on each side. Carefully pull the flash tube
from the flash unit.
(Fig. 11)
(Fig. 13)
(Fig. 12)