Starblitz 3760173051106, Руководство пользователя

Страница: 8 / 40

EN
FR
ES
6
How to use?
1. Charging V-Mount batteries
1-1.
Connect Starblitz® SCHVL charger with a 220v
power supply described, the power LED will light up.
1- 2. Insert the V-mount lithium-ion batteries into 2
charger channels, it starts charging.
1- 3. Once the batteries are attached, the battery LED
lights.

The charge status light indicates that the batteries
are being charged.

Color change: 85% load.

The red LED will turn to green when the battery is
charged at 85%.

Full load

The light is on when the batteries are fully charged.
2. Using the DC Output
2-1.
When the output port is connected to the cable,
the motor begins to power the DC output and stops
recharging the batteries.
2- 2. When the AC power supply is on the off button,
the on-line batteries can be used as an emergency
power supply and provide a sequential current out-
put through the XLR 4 pins connector, the discharge
status LED lights up.
2- 3.
If one of the two batteries is removed from the
charger’s power supply processor, the DC power sup-
ply will not turn on.
Heat prevention:

It is a normal phenomenon that the charger releases
a slight heat during the charging to ensure secured
charging process, place the charger in a ventilated place
to ensure a good charger operation.

If no output is detected when a DC cable is connected,
check if it is an exclusive cable.