Please take time to read the following safety operating instructions. They are
the key to the successful operation of your Ultra-Max Conveyor Oven.
SAFETY TIPS
For your safety, read before operating.
If you smell gas:
1.
DO NOT
try to light any appliance.
2.
DO NOT
touch any electrical switches.
3. Use an exterior phone to call your gas
supplier immediately.
4. If you cannot reach your gas supplier, call
the
fi
re department.
In the event of a power failure:
1. Turn all switches off.
2.
DO NOT
attempt to operate the oven until
the power is restored.
8
®
switch to the"OFF" position and wait five minutes.
4) After five seconds, the new numbers will be saved and the oven
decrease TIME or TEMPERATURE. Hold button down for
3) Press the up button (
) to increase or the down button (
) to
hold for four seconds until TIME display goes blank.
1) Press the up and down buttons (
) at the same time,
faster display changes.
will display new settings.
and TEMPERATURE.
2) Press the enter button ( ) to switch between TIME
Adjusting TIME and TEMPERATURE:
After five minutes, retry.
ON
OFF
If burner does not lght in one minute push the power
Push power switch "ON".
To Start:
"HEAT" LIGHT
uv
u
v
General Safety Tips:
1. If the oven needs to be moved for any
reason, the power must be disconnected
from the unit before doing so.
2. DO NOT remove the control box cover
unless the oven is unplugged.
OPERATION
To turn the oven on:
1. Push the power switch to "ON."
2. After the fan begins to build pressure,
the pressure switch will provide power to
the control board to engage the heating
element contactor. You should hear an
initial "click" from the contactor as it begins
to heat.
To adjust the time and temperature:
1. Press the DOWN and UP arrows
(
) at the same time. Hold for four
seconds until the TIME display goes
blank.
2. Press the ENTER button (
) to switch
between TIME and TEMPERATURE.
3. Press the UP arrow (
) to increase or the
DOWN arrow (
) to decrease the TIME
or TEMPERATURE. Hold either button
down for faster display changes.
4. After
fi
ve seconds, the new numbers will
be saved and the oven will display the new
settings.
To turn the oven off:
1. Push the power switch to "OFF." The
oven is equipped with a cool-down feature
for motor shaft and bearing protection.
This enables the blower motor(s) to run
regardless of the controller status. The
blower(s) continue to run until the oven
cools to a safe temperature.
