Star PGC28I, Руководство пользователя

Страница: 8 / 24

4
DAILY OPERATION
CERTAIN SURFACES ARE EXTREMELY HOT DURING
OPERATION AND CARE SHOULD BE TAKEN WHILE
USING THIS UNIT.
DO NOT LEAVE THE UNIT IN OPERATION WITHOUT
AN ATTENDANT.
DO NOT LEAVE THE UNIT AT HIGH TEMPERATURE
WHEN NOT IN USE OR DURING IDLE PERIODS.
DO NOT USE SHARP OBJECTS TO REMOVE CARBON
BUILD-UP.
BEFORE CLEANING, MAKE SURE THE UNIT IS OFF,
UNPLUGGED, AND HAS COOLED DOWN.
DO NOT USE ICE ON THE COOKING SURFACE.
INITIAL START UP
i. Level the unit by adjusting the feet.
ii. Before using the unit for the first time, clean the grill
[refer to the “CLEANING” section]. Power the unit on
and set the heat to 350° F (177° C). Allow th unit to
heat for approximately 45 minutes. The grill will emit
a small amount of smoke as the cooking surfaces reach
the set temperature. This is a normal side effect of the
oil burning off the platen. This is best done in a well
ventilated area.
iii. After the initial start-up, the griddle surfaces must be
seasoned. Bring the grill to 300° F (149° C) [setting “5”
on thermostat controlled models].
iv. Apply a salt-free release agent and brush the cooking
surface. If using an aerosol release agent, spray into
a cup and then brush onto the cooking surface.
iv. Allow the unit to sit [still set to 300° F (149° C)] for
20 minutes, and then, being careful to avoid touching
the hot surfaces directly, wipe the cooking surfaces
clean using a warm, damp cloth.
DAILY SEASONING
i. Before beginning cooking or after long breaks,
it may be necessary to apply a salt-free release
agent and brush the cooking surface to prevent
product sticking. If using an aerosol release agent,
spray into a cup and then brush onto the cooking
surface.
CLEANING
i.
Turn the unit “OFF” and allow it to cool enough
to be safe.
ii.
Scrape off any residue or remaining product that
is stuck to the cooking surface using a non-metal
scraper.
iii.
Wipe down the unit with a soft cloth and a mix
of water and a mild dish detergent. Rinse out the
cloth and repeat using only warm water.
iv.
Remove and empty the grease drawer and clean
it using a mild detergent.
v.
Allow the unit to dry completely before using.