– 34 –
Adjustment value according to the paper you are using
Paper
Thickness
(μm)
ø12 (A) inner diameter / ø18 (B) outer di-
ameter core roll paper
Detected diameter (C)
(mm)
Remaining paper
length (m)
Level 1
Level 2
Level 1
Level 2
65
Approx.
ø23
Approx.
ø26
Approx.
2.5
Approx.
4.3
85
Approx.
ø23
Approx.
ø26
Approx.
1.9
Approx.
3.2
Notes:
1) The adjuster is factory-set at level 1.
2) The detected diameter and remained paper length
given in the table are calculated values, and there
are some variances depending on the rolled state of
the paper, the actual mechanism, or the printing pat-
tern.
3) If thick paper is used (paper thickness 80 μm or
greater), the paper roll may loosen and cause vari-
ances in the detected values. Therefore, setting the
adjuster to Level 2 is recommended.
C
C
B
A
Paper roll core
