6
CLEANING cont
DO NOT USE SHARP OBJECTS TO REMOVE CARBON BUILD-UP.
BEFORE CLEANING MAKE SURE POWER IS TURNED OFF, UNIT IS
UNPLUGGED AND IS NOT TOO HOT.
DO NOT SPLASH WATER ON FRONT CONTROL PANEL!
DO NOT SPLASH WATER ON FLEX CONDUIT CONNECTING TOP AND
BOTTOM OF THE UNIT.
Do not use ice or cold water to clean the cooking surfaces when the unit is hot. The surfaces
are cast aluminum or cast iron and may crack or deform under the shock of rapid temperature
change.
OPERATION TROUBLESHOOTING
1. Unit not heating.
A
. Check if unit is plugged in correct receptacle.
B
. Check incoming power line.
C
. Check that thermostat is set to proper temperature.
If unit still does not operate contact the factory or one of its representatives or a local service
company for service or required maintenance.
CAUTION
WARNING
WARNING
